Fahrflaeche 3500kg Schwelleraufnahme

ZS VARIO 3.5 F

Two Post Inground Lift with platform support and 3500 kg load capacity

VP 252115
Description

Two-post in-floor lift with driving platforms and Platform support

Driving platform:

  • Driving platform length 4400 mm ideal for cars and small transporters
  • Ample freedom of movement in the working area below the lifting platform thanks to the compact post-lifting unit and resulting optimum lighting below the raised vehicle in particular
  • Flexible lift with maximum application range thanks to
    ○ Fast hoisting of the vehicle with the main platforms in the service consultation area or for chassis alignment checks
    ○ also for repair or for inspection work
    ○ wheel-free lifting by means of swing arm support standard up to 600 mm lifting distance or optionally with full extension up to 2000 mm
  • Optionally, can be upgraded to vehicle check-in lift with driving platform levelling for level driving
  • Optional conversion to chassis measurement lift with precisely aligned driving platforms, sliding plates for tension-free wheel support, driving platform levelling and axle measurement supports
  • Wheel-free jack extension elements infinitely adjustable while jack is in its starting position, thereby eliminating the need for time-consuming jacking for set-up and functioning as an interim means of stopping the jack from moving backwards in emergency cases
  • Lift can be driven onto easily thanks to wheel-free jack platforms with full driving platform width
  • Wheel-free jack holder fully granulate-coated as standard
  • A high-quality powder-coated platform covering assists in corrosion protection and adds a significant upgrade in terms of appearance
  • Optional driving platform coating with granulate coating or Aluminium panelling
  • Pre-integrated compressed air connection and optional 230V/1PH energy supply in runways
  • Various assembly variants for optimum use with
    ○ driving platform resting on floor with low drive-on height and platform movement area with no tripping hazard edges
    ○ driving platforms flush with floor to facilitate driving onto the lift, no protruding assemblies in the lift area
    ○ driving platforms flush with floor to facilitate driving onto the lift, no protruding assemblies in the lift area with complete floor levelling of the platform movement area with no tripping hazard edges
  • Driving platform and floor levelling pre-equipped for use of an optional axle lift
  • Additional corrosion protection treatment in area of fold and cavity sealing
  • Optional no-dazzle rotatable LED lighting
  • Pinch point and shear point protection thanks to CE stop

Lift unit:

  • A corrosion-resistant, hard-chrome plated hydraulic piston ensures long-term stability since this is immersed in hydraulic oil with every lift, thus ensuring the application of a latent protective film.
  • Simple, suspended installation of the lifting platform - offering the advantage of power transmission directly into the hall floor
  • Ultra-quiet hydraulic pump and electric motor, corrosion-resistant oil-submerged version, optionally available with organic oil
  • Electronic lift control with visual error display
  • Battery-operated emergency lowering
  • Optimisation of every aspect of workplace ergonomics thanks to optional, standard-independent control via traffic-light energy module or flush-mounted switching system

Standard Delivery:

  • Driving platform 4400 mm powder-coated gentian blue (RAL 5010)
  • Wheel-free jack platform powder-coated gentian blue (RAL 5010)
  • Lift unit with integrated after-lift device
  • Ramps and drive-on plates
  • Rapid-action compressed-air coupling mounted on driving platform
  • Wiring and mounting material
  • Installation box/installation frame not included in delivery
  • Emergency DOWN cable for connection to switch box
  • Control unit with 4 x 10 m control cables (flexible oil cables)
  • Lockable master switch
  • Operating manual and test log
  • EC Declaration of Conformity CE

Documents
VARIO
DE | EN | ES | FR
ZS VARIO 3.5 F
DE | EN | ES | FR
Technical data
Load capacity CE3500 kg
Load capacity CE with wheel-free jack3500 kg
Lifting height max.2090 mm
Full travel of wheel-free jack600 mm
Wheel-free jack installation height60 mm
Post diameter125 mm/90 mm
Wheel-free jack lengthways holder, continuous1325 mm - 2042 mm
Wheel-free jack crosswise holder840 mm - 2074 mm
Raising / Lowering time (load-dependent) approx.35 s / 35 s
Lifting/lowering time of wheel-free jack depending on load approx.11 s / 11 s
Installation depth2380 mm
Inner drive-through width840 mm
Piston centers1350 mm
Operating pressure28 bar
Motor power3 kW
Fuse gG16 A
Power supply3/N/PE 400 V 50 Hz
Control unit (H x W x D)400 mm x 280 mm x 120 mm
Dimensions total (L x W x H)5471 mm x 2074 mm x 186 mm
Runway dimensions (L x W x H)4400 mm x 617 mm x 126 mm
Hydraulic fluid quantity (not included in standard delivery)108 l
Images
Request for quotation
*required fields
Our website uses cookies to provide you with the best possible service. By using this website, you agree.Data protection