MET 6-3 frei Leitfaden

MET 6.3

Emission Tester Combi Tester Petrol/Diesel

VP 135213

  • Emission tester stands out due to limited weight and compact design
  • Short warm-up time, quick measurement readiness
  • One single probe sufficient for diesel and petrol
  • Accurate analysis of gas components HC, CO, CO2, O2 with lambda value calculation
  • Time-saving and easy testing/diagnosis of opacity/particle concentration using the partial flow method with free acceleration or engine under load
  • Intuitive operation, clear structure in emissions testing process as set out in current guidelines 5 enable minimum cycle times
  • The MAHA VCI makes EOBD analysis easy
  • Innovative condensate separation thanks to active water separator
  • Easy to maintain thanks to optimum accessibility
  • Future-proof with the latest technology
  • All measurement values HC, CO, CO2, O2, K-value, turbidity, particle concentration can be displayed simultaneously
  • Option:
    ○ Expandable for NOx analysis; (nitrogen monoxide (NO) and nitrogen dioxide (NO2) are measured separately)
    ○ W-LAN interface

Petrol Tester Module Description:

  • Partial flow emission tester with display unit (basic device) for analysis of gas components HC, CO, CO2 and O2 with lambda value calculation
  • Emission testing of CNG, LPG and petrol engines possible

Diesel Tester Module Description: Official German PTB-approval 18.09

  • Instantaneous or continuous measurement
  • Options:
    ○ W-LAN interface

Standard Delivery:

  • Basic units: gas analyser and opacimeter/particle measurement device in a high-quality synthetic casing with integrated display unit and keypad
  • Steel mesh emission probe, 600 mm, 2000 mm probe tubing
  • LAN interface with LAN cable (RJ 45)
  • Power supply unit 110V - 230V, 50/60Hz
  • Transparent drain hose for condensed water with collecting tank
  • Main filter, zero filter and condensate filter
  • Electrochemical O2 sensor
  • Trigger tongs for MET 6.3 for inductive RPM measurement at ignition cables
  • 2 replacement filters, 2 replacement seals
  • Measurement software for continuous measurement and control of MET without country-specific test procedure

DE | EN | ES | FR
MET 6.3
DE | EN | ES | FR
Technical data
Measurable gasesHC, CO, CO2, O2
Measuring principle Infrared spectrometryHC, CO, CO2
Measuring principle Electrochemical detectionO2
Flow3.5 l/min
Accuracy classO (OIML)
CO - Measurement range / Measured value resolution (max.) - 15 % Vol. / 0,01
CO2 - Measurement range / Measured value resolution (max.) - 20 % Vol. / 0,01
HC - Measurement range / Measured value resolution (max.) - 9999 ppm / 0,1
O2 - Measurement range / Measured value resolution (max.) - 25 % Vol. / 0,01
Lambda (calculated)0,5 - 9,99 / 0,01
Warm-up time of the measurement chamber approx.150 s
Measuring range particle concentration - 1100 mg/m³
Resolution of particle concentration1
Measurement range turbidity - 100 %
Measuring range absorption coefficient - 9.99 m-1
Resolution absorption coefficient9.99 m-1
On-board voltage10 V / 30 V
Power supply1/N/PE 110 V/230 V 50 Hz/60 Hz
Ambient temperature0 °C - 45 °C
Operating height-10000 mm - 300000 mm
Dimensions total (L x W x H)160 mm x 225 mm x 406 mm
Weight5.0 kg
Request for quotation
*required fields
Our website uses cookies to provide you with the best possible service. By using this website, you agree.Data protection