MET 6-2 frei 2 Leitfaden

MET 6.2

Emission Tester for Diesel

VP 135036

  • Emission tester stands out due to limited weight and compact design
  • Short warm-up time, quick measurement readiness
  • Time-saving and easy testing/diagnosis of opacity/particle concentration using the partial flow method with free acceleration or engine under load
  • Intuitive operation, clear structure in emissions testing process as set out in current guidelines 5 enable minimum cycle times
  • Varied and simple network connection options LAN / WLAN (optional)
  • The MAHA VCI makes EOBD analysis easy
  • Official German PTB-approval 18.09
  • Instantaneous or continuous measurement
  • Innovative method for separation of condensed water thanks to active water separator
  • Options:
    ○ W-LAN interface

Standard Delivery:

  • Basic device (opacimeter) opacity measurement device/particle concentration measurement device in high-quality synthetic casing with integrated display unit and keypad
  • Steel mesh emission probe, 600 mm, 2000 mm probe tubing
  • LAN interface with LAN cable
  • Power supply unit 110V
  • 230V, 50/60Hz
  • Main filter, zero filter and condensate filter
  • Transparent drain hose for condensed water with collecting tank
  • 2 replacement filters, 2 replacement seals
  • Measurement software for continuous measurement without country-specific test procedure

DE | EN | ES | FR
MET 6.2
DE | EN | FR
MET 6.3
ES |
Technical data
Warm-up time of the measurement chamber approx.150 s
Measuring range particle concentration - 1100 mg/m³
Resolution of particle concentration1
Measurement range turbidity - 100 %
Measuring range absorption coefficient - 9.99 m-1
Resolution absorption coefficient0.01 m-1
On-board voltage10 V / 30 V
Power supply1/N/PE 110 V/230 V 50 Hz/60 Hz
Dimensions total (L x W x H)406 mm x 225 mm x 160 mm
Weight4.6 kg
Request for quotation
*required fields
Our website uses cookies to provide you with the best possible service. By using this website, you agree.Data protection